Best Car Cleaning Services in India

Included:

• Inspection of chimney structure
• Repair of cracks and leaks
• Repointing mortar joints
• Chimney cap installation or repair
• Flue cleaning and maintenance
• Firebox and damper repairs
• Zerobrokage Home Service warranty*

Excluded:

• Major structural repairs
• Rebuilding of entire chimney
• Installation of new chimney systems
• Services unrelated to chimneys (e.g., roofing or gutter work)

Frequently Asked Questions:

1. How often should my chimney be repaired?
   Inspect annually, repair as needed.

2. Do you repair gas fireplaces?
   Yes, we handle gas and wood-burning systems.

3. Is chimney repair covered by insurance?
   It depends on your policy. Check with your provider.

Included:

• Full chimney installation (wood, gas, or pellet)
• Flue liner installation and inspection
• Chimney cap and damper installation
• Ventilation system setup
• Custom chimney design and planning

Excluded:

• Major structural work unrelated to chimney
• Roofing or siding installation
• Installation of non-chimney heating systems

Frequently Asked Questions:

1. How long does chimney installation take?
   Typically 1-2 days, depending on complexity.

2. Do you provide chimney inspections?
   Yes, we offer inspections before installation.

3. Can you install a chimney for a gas fireplace?
   Yes, we install chimneys for all types of fireplaces.

Included:

• Removal of chimney, flue, and components
• Sealing and repairing any resulting openings
• Safe disposal of materials
• Post-removal structural inspection

Excluded:

• Roof or siding repairs
• Non-chimney heating system removal
• Extensive home reconstruction

Frequently Asked Questions:

1. What happens to the space after chimney removal?
   We seal and repair any openings left behind.

2. Do you offer cleaning services?
   No, cleaning is not part of the uninstallation service.

3. Is chimney uninstallation necessary for home safety?
   If unused, removal can prevent hazards like blockages.

No Data Found

Areas Covered:

1. Mesh and Basic Filter Cleaning
2. Exterior surface degreasing and other stains removal

Impact of Cleaning:

1. Removal of grease and other stains for cleaner look
2. Basic Filter cleaning helps in better suction
3. Better airflow in duct pipes
4. Industry grade chemicals used for better working in the long term

Please Note:

1. Chimney dismantling and interior duct/carbon filter cleaning is not included.

No Data Found

Included

1. Chimney Inspection:

   • A thorough inspection to assess the condition of the chimney, flue, and other components.
   • Identifying blockages, soot buildup, and potential structural issues.

2. Cleaning the Chimney Flue:

   • Removal of soot, creosote, and debris from the flue (using brushes, vacuums, and other specialized tools).
   • Cleaning the chimney cap or chimney crown to ensure proper airflow.

3. Dismantling or Disassembling the Chimney (if required):

   • If the chimney is damaged or needs to be rebuilt or replaced, the dismantling service may include safely taking apart the chimney structure.
   • This includes removal of bricks, tiles, or other materials that are part of the chimney system.

Excluded

from Chimney Dismantling and Cleaning:

1. Structural Repairs:

   • If there are cracks, leaks, or significant damage in the chimney structure, repairs would usually be excluded from a standard cleaning and dismantling service.
   • Any masonry work, such as rebuilding or replacing damaged bricks, would typically be an additional cost.

2. Chimney Liner Replacement:

   • If the chimney liner needs to be replaced or repaired, this is often not included in a basic cleaning service and would require separate work.

3. Cost of New Chimney Parts:

   • Any new parts needed for the chimney system, such as a new chimney cap, flue liner, or masonry components, are typically excluded from the service unless specifically stated in the quote.

Included in Chimney Dismantling:

1. Removal of Chimney Structure:

   • Dismantling the chimney from the roof down to the foundation, including the removal of bricks, mortar, and any other materials.
   • This may include the removal of flues, caps, liners, and other components that make up the chimney.

2. Disposal of Materials:

   • The removal and proper disposal of debris, bricks, and other materials from the dismantled chimney, which could include hauling the debris away from the island property.

3. Safety Precautions:

   • Ensuring safe practices are followed throughout the dismantling process, such as scaffolding, harnesses, or other safety equipment to prevent accidents.

4. Capping or Sealing the Chimney Base:

   • Sealing or capping the base of the chimney once it's dismantled, preventing water ingress or structural damage.

5. Site Cleanup:

   • Removing all debris from the area, ensuring that the surrounding area is clean and free of hazardous materials once the chimney is dismantled.

Excluded from Chimney Dismantling:

1. Structural Repair of the Roof or Foundation:

   • If the chimney’s removal causes damage to the roof or foundation, repairs to these parts may be considered a separate service and would not typically be included in the basic dismantling project.

2. Restoration or Renovation of the Surrounding Area:

   • Any restoration work on the roof, walls, or area around the chimney after removal may not be part of the dismantling service unless specified.

3. Handling Hazardous Materials (e.g., Asbestos):

   • If there is asbestos or other hazardous materials in the chimney or surrounding areas, removal or handling may be excluded unless specified as part of the scope. Special removal protocols are often required for these materials.

4. Chimney Relocation or Installation of New Chimney:

   • If the job involves installing a new chimney or relocating an existing one, this would typically be considered a separate job from the dismantling process.

Included in Chimney Repair Service:

1. Chimney Inspection:

   • A thorough examination of the chimney structure, flue, and fireplace to identify any signs of wear, damage, or potential hazards. This may include video inspection in some cases.

2. Chimney Cleaning (if necessary):

   • Cleaning of soot, creosote buildup, or any debris in the chimney to improve safety and efficiency. Regular cleaning can prevent fires and ensure the proper functioning of the chimney.

3. Crack Repairs:

   • Repairing cracks or leaks in the chimney structure, including the brickwork, mortar joints, and flue. This may involve tuckpointing or sealing with appropriate materials.

4. Crown and Cap Repair/Replacement:

   • Fixing or replacing a damaged chimney crown (the top part of the chimney) and chimney cap (the protective covering) to prevent water entry, debris, and animals from entering the chimney.

5. Flue Liner Repair or Replacement:

   • Repairing or replacing a damaged or deteriorating flue liner, which is essential for the safe passage of gases and smoke. This can involve installing a new liner if the old one is beyond repair.

6. Waterproofing:

   • Applying waterproofing solutions to the chimney structure to prevent water penetration, which can cause long-term damage to masonry.

7. Smoke Chamber Repair:

   • Repairing or improving the smoke chamber, which helps direct the smoke out of the home. A damaged smoke chamber can lead to poor drafting and even dangerous conditions.

8. Chimney Flashing Repair:

   • Repairing or replacing the flashing around the chimney to prevent leaks that might occur where the chimney meets the roof.

9. Replacing or Installing New Damper:

   • Replacing or installing a new damper (the device that controls airflow in the chimney) to improve ventilation and energy efficiency.

10. Masonry Repair:

    • Rebuilding or repairing damaged bricks and mortar. This often includes addressing structural issues or weather-related wear.

Excluded from Chimney Repair Service:

1. Structural Overhaul:

   • Major structural repairs that require extensive rebuilding of the entire chimney. For example, if the chimney has a significant collapse or needs a complete rebuild, this will generally be outside the scope of basic repair services.

2. Roof Repairs:

   • While chimney flashing may be part of the repair, general roof repairs (such as fixing shingles, roof leaks, or gutter issues) are typically not included in chimney services unless the chimney work requires access to the roof.

3. Extensive Firebox Repairs:

   • While minor repairs to the firebox may be included, extensive damage that requires rebuilding or replacing the firebox entirely may be excluded, depending on the service.

4. Major Demolition:

   • If the chimney repair requires demolition work that extends beyond a simple rebuild or patch-up of specific parts, the service may exclude these costs.

5. Mold Remediation:

   • If there’s mold growth caused by water damage, chimney services typically do not address mold removal, which is a separate service.

Included 

1. Site Assessment and Consultation:

   • A professional will evaluate the location and type of chimney required (e.g., traditional masonry, prefabricated, etc.).
   • The consultation will also consider the type of appliance (wood stove, fireplace, etc.) and the necessary height, flue size, and clearance for the chimney.

2. Chimney Selection and Sizing:

   • Based on your needs and the structure of your home, the contractor will help select the appropriate chimney system.
   • Sizing includes flue diameter and height based on your appliance and local building codes.

3. Chimney Installation:

   • Installation of the chimney structure, including the flue, liner, cap, and other components.
   • For prefabricated chimneys, the installation often includes setting up the modular system.
   • Masonry work, such as building a chimney from brick or stone, if required.
   • Attaching the chimney to the stove or fireplace flue.

4. Flue Liner Installation:

   • Installation of a flue liner, which helps with safe exhaust venting and ensures proper draft. This is typically included with new chimney installations or when a liner upgrade is necessary.

5. Chimney Cap Installation:

   • A chimney cap is often included to prevent debris, animals, and weather elements from entering the chimney. This also helps maintain the chimney's function and efficie

Excluded:

1. Repairs or Modifications to Existing Chimney:

   • Any necessary repairs to existing chimneys (like cracked liners or damaged brickwork) are usually separate from the installation.
   • Modifications to the structure of the home (e.g., enlarging a hole for a chimney or altering the roof structure) are often additional costs.

2. Ventilation or Air Quality Systems:

   • Installation of other ventilation systems (e.g., an air circulation system) may be excluded unless specified.

3. Appliance Installation:

   • Installation of the stove, fireplace, or other appliances may be separate unless it is part of a full service package.

4. Building Permits and Fees:

   • Permits or inspections required by local government agencies (though the contractor may assist in obtaining them) might not be included in the basic installation service.

5. Chimney Cleaning:

   • While some chimney installers may offer cleaning, it is often a separate service that’s not part of the installation

Areas Covered:

• Mesh and Basic Filter Cleaning
• Exterior surface degreasing and other stains removal

Impact of Cleaning:

• Removal of grease and other stains for cleaner look
• Basic filter cleaning helps in better suction
• Better airflow in duct pipes
• Industry grade chemicals used for better working in the long term

Please Note:

• Chimney dismantling and interior duct/carbon filter cleaning is not included.

No Data Found

Included

1. Chimney Inspection:

   • A thorough inspection of the chimney's interior and exterior is usually included to identify any damage, blockages, or areas needing attention.

2. Chimney Cleaning:

   • Removal of soot, creosote, and debris from the chimney lining and flue.
   • Cleaning of the chimney cap, if applicable.
   • Sweeping the chimney with brushes and tools to ensure proper airflow.

3. Dismantling the Chimney:

   • Safe removal of the chimney stack (in case of chimney dismantling).
   • Disassembly of the chimney structure, which may include the chimney pot, flue liners, and other parts.
   • Proper disposal of materials during dismantling.

4. Clearing Blockages:

   • Removal of any blockages or obstructions (like birds' nests, debris, etc.) that could affect the chimney's functionality.

5. Repairs (if necessary):

   • Minor repairs to the chimney structure during cleaning and dismantling (e.g., patching small cracks, fixing seals).

Excluded 

1. Major Repairs or Renovations:

   • Extensive structural repairs (e.g., rebuilding parts of the chimney or replacing major components like the flue liner) are usually not included.

2. Chimney Relining or Rebuilding:

   • Installing or replacing a chimney liner, or rebuilding large sections of the chimney, would generally be an additional service.

3. Masonry Work:

   • If the chimney’s brickwork or stonework needs significant attention or reconstruction, this may not be covered under basic dismantling and cleaning.

4. Remodeling or Adding New Chimney Features:

   • Modifications like adding a new chimney cap, damper, or changing the appearance of the chimney may require a separate contract or estimate.

5. Non-Chimney Related Cleaning:

   • General cleaning of the area around the chimney (like sweeping the fireplace area) might not be included.

6. Crown Repair:

   • If the chimney crown (the top part of the chimney) needs repairs, this may be excluded unless specifically mentioned in the service agreement.

7. Permits and Inspections:

   • Some areas require special permits for dismantling or major repairs, which are often not included in the standard cleaning or dismantling service.